Detailed assembly guide for the RAUL bed

We’re pleased to provide you with a step-by-step assembly guide for the RAUL bed, designed to help you build a sturdy and long-lasting bed frame with ease.

Bed components:

• 1 x Headboard
• 3 x Bed sides (2 long side panels and 1 base panel)
• 2 x Central beams made of pine wood
• 2 x Central legs made of pine wood with integrated metal screws
• 2 x Raw particleboard panels for mattress support
• 8 x Metal brackets to secure the side panels (4 of which come with legs)
• 36 x Screws and nuts (pre-installed in the side panels and headboard, used for securing the brackets)

Assembly process:

Step 1: Preparation
Before starting the assembly, make sure to check all the parts and tools required. The screws and nuts are pre-installed in the side panels and the headboard; they need to be temporarily removed to install the metal brackets.

Step 2: Installing the metal brackets on the long side panels
Attach two metal brackets to each end of the long side panels, as follows:
Brackets with legs should be installed at the bottom of each side panel for added support.
Brackets without legs should be installed at the top of each side panel.
Ensure that all screws are tightly fastened guarantee stability.

Step 3: Attaching the side panels
Secure the long side panels to the headboard and base panel using the previously installed brackets. Tighten each connection firmly and check the alignment of all parts to ensure the frame is straight and stable.

Step 4: Securing the central legs
Attach the central wooden legs to the central beams by screwing them into the threaded inserts. Ensure they are tightly fastened for optimal stability.

Step 5: Installing the central beams
Position the two central beams lengthwise between the headboard and the base panel. These beams come pre-fitted with angled brackets. Securely fasten the beams using screws through the large holes in the brackets. Make sure the beams are aligned and stable.

Step 6: Installing the particleboard panels
Place the two particleboard panels within the frame, resting them on the central beams. These panels provide a stable support surface for the mattress and help distribute weight evenly.

Step 7: Positioning the mattress
Once the particleboard panels are in place, lay the mattress within the bed frame. Ensure that the mattress is properly positioned and that all parts of the frame are stable.

By following these steps carefully and using the provided parts, you’ll have a sturdy, comfortable bed ready for use. Enjoy your new RAUL bed! 

Folosim cookie-uri pentru a va oferi cea mai buna experienta posibila pe site-ul nostru. Continuand sa utilizati acest site, sunteti de acord cu utilizarea cookie-urilor.
Accept